They directly affect the service life of bearings and the transmission efficiency of fans. Some Roots fans are designed to prevent accidents. When the Roots blower is put into use, the Hubei Toupu blower manufacturer shall not regularly remove dust, dirt, and water from the Roots blower and gas pipeline within a range of 10 meters in the import and export direction. Roots blower structure: ordinary three blade Roots blower 2.2kW parameters: high-pressure three blade Roots blower matched with a 2.2kW motor, Roots blower parameters only have one model. At the same time, it reduces the frequent start and stop of wind turbine units, reduces equipment losses, and saves equipment maintenance costs.

This is impossible to choose. If we want to make an accurate choice, we need to provide several other parameters, including pressure parameters and air volume parameters. If other parameters are needed, we need to consider these factors. Usually, the pressure of the compressor is very high. If the pressure of the compressor we use is less than 200KPa, we can use a Roots blower. Generally speaking, due to the different blade structures of three bladed and double bladed impellers, the mechanical performance of three bladed rotors is better than that of double bladed impellers.

The imported muffler of the three leaf Roots blower not only reduces noise, but also plays a good filtering and protection role. Therefore, it is necessary to install an intake muffler. When the Roots blower is running, the oil levels in the main and auxiliary oil tanks must be between the two red lines on the oil level gauge. The air lock of the continuous pump should be immediately stopped, and the power fan should be stopped appropriately. The parameters of Roots blowers are generally determined in the early stages of engineering design, and manufacturers of centrifugal blowers do not need to worry about the procurement personnel of rotary blowers for sewage treatment.